Toyota Tundra Limo 2016 – Bullet Proof Armored Truck by Devolro

016 TOYOTA TUNDRA CREW MAX SR-5, 5.7L V-8 381HP 

Devolro tune up trucks are used in 15 countries including Afghanistan, Saudi Arabia and Russia in high intensity conflict areas. It’s comfortable all terrain vehicle with style, reliability and safety in one.

$175,000 OBO

Standard Options:

BilletCustom 7 inch suspension lift and upgrade with 2.5 coil-over’s with remote reservoir front and 2.5 piggyback rear shocks by “DEVOLRO”

Billet aluminum upper control arms by “DEVOLRO”

Reinforced CV-joints, up to 600 HP

Reinforced front and rear sway bars

R37 Nitto tires on 22 inch wheels, 5 pcs.

Fender flares by “DEVOLRO”

Stainless steel skid plate for engine, transfer case and transmission by “DEVOLRO”

Step bars by “DEVOLRO”

Custom steel front bumper by “DEVOLRO” with 2″ LED Rigid

Custom steel rear bumper by “DEVOLRO”

Warn 9.5 CTI winch front 9500 lb. + wireless remote by “DEVOLRO”

Warn 9.5 CTI winch rear 9500 lb. by “DEVOLRO” + additional power supply battery

High output alternator replacement to 320 Amp (from 170 Amp stock for 5.7 liter V8)

Custom bi-xenon (hi-beam/low-beam) headlights by “DEVOLRO” + core

Smoked taillights LED by “DEVOLRO” + core

60-inch “Xtreme” scanning amber, white & red LED tailgate bar

Smoked front cab lights, set of 5

Smoked rear cab lights, set of 5. (topper mount)

Sound-vibro-heat deadening (whole cabin, doors, walls, cabin floor)

Large capacity fuel tank replacement, 173 liter / 46 gal

4.88 gear ratio package improves towing and optimizes engine and transmission load

A powerful 60 inch hi-lift jack

All-season floor mats

Custom grill by “DEVOLRO”

Topper by “DEVOLRO”. (Full walk in door)

Roof rack by “DEVOLRO”, aluminum, for topper

Tire carrier for the trunk bed

Reinforced BREMBO 400-mm. brake system

Additional 2000 Lb. to payload

Protective rubber truck bed insert

Full Perimeter LED Cargo Area Lighting

Chrome shackles, 4 pcs.

Portable power inverter with a charging station, 100-220 volts

High power battery replacement

Crew Max Limousine Cab Extension (8 ft., 2.5 m.)

LED bar 50 inch, 1 pc. (roof rack mount, 180 Degree / 1 Mile range)

ARMOR:

From B6 to B7 armor — all of our armor components are fabricated using CAD laser and plasma cutting tools to produce armor panels that fit perfectly into the platform of choice. Our fabrication process ensures quick turnaround because all armoring components are pre-manufactured. Our armoring techniques are visibly discrete and use the minimum number of panels necessary for solid protection. We especially address weak points such as the floor area and foot-wells that need extra protection. The rear tailgate is protected with a ballistic steel door, a ballistic glass window and is reinforced with steel overlaps. The bottom of the doors, which are particularly vulnerable areas in most armored cars are secured with overlaps in armor around all doors and windows. This overlap system also helps to protect the passengers from being harmed from flying, armor glass in the case of a bomb blast.

Our ultra-lightweight composite armor is proprietary and is used exclusively in our vehicles. DEVOLRO armored cars exceed B6 levels of protection (45°) in floor and roof areas by providing safety of any angle of attack. The entire armor system is bonded to the chassis which strengthens the structure of the passenger compartment. Amazingly, a full armoring package weighs less than 800 lb. As a result, there is almost no loss in performance.

We consider an armored car to be a must have for personal and corporate security.

DEVOLRO B6 ARMORING SPECIFICATIONS

⁍ GLASS TRANSPARENT ARMOR — Stock windshield is replaced with 42 mm bullet resistant composite transparent armor. This multi-layer glass armor is a special combination of poly-carbonate and glass that mitigates shrapnel upon ballistic impact. Armoring glass can be curved and contoured to retain the exact original appearance.

⁍ BODY — Body components are armored with a ballistic composite material and ballistic steel in accordance with B6 requirements. Armored components include: Doors, pillar posts, side panels, kick-panels, firewall, header areas, rear cargo compartment, rear wheel arches, rear seat and trunk areas. Special armoring is installed to doubly protect especially vulnerable windows and door seams.

⁍ ROOF — Composite armoring meets or exceeds NI- IIIa Standards.

⁍ FLOOR — The entire floor area is armored using molded composite rigid ballistic anti-fragmentation materials. This effectively protects against grenades equivalent to the German DM-51 or US M-67.

⁍ FRAME — The pillar posts and hinge mounts are reinforced with special steel plates.

⁍ BATTERY — Battery compartment armoring complies with NIJIII standards.

⁍ DOOR SUPPORTS — Proprietary Reinforcement System by DEVOLRO.

⁍ ENGINE — Electronic control Module (ECM) protection armoring complies with NIJIII standards.

⁍ EXHAUST SYSTEM — Wire mesh tailpipe protection against insertion of foreign objects.

⁍ FUEL TANK — Composite armoring material guards against penetration and fragmentation and can withstand DM-51 or M-67 grenade.

⁍ POWER WINDOWS — Composite ballistic opaque armoring complies with NIJIII standards.

⁍ BUMPERS — Provides extra safety and brute force upon impact, accidental or deliberate.

⁍ RUN-FLAT TIRES — Provides drive-ability to run 50-100 km after puncture or whole tire damage.